Persberichten

Hier vindt u onze actuele persberichten. 

Hebt u vragen over ons bedrijf of producten neem dan contact met ons op. Wij kijken uit naar uw bericht.

 

KDS/KES-VS sealing plugs

CONTA-CLIP expands its range of accessories for the KDS and KES cable management systems, adding sealing plugs. The KDS/KES-VS plugs have a mushroom head that prevents complete insertion and allows for easy removal. They are available in diameters between 1.5 mm and 22 mm. The sealing plugs provide flexible and reliable sealing of feedthrough channels according to protection degree IP66. Their protruding edge provides additional protection against splashing water and dust. The plugs can be used to quickly seal KES openings that have been perforated; and they allow for pre-configuration of KDS sealing elements for cable assemblies that can be completed at a later point. CONTA-CLIP's KDS and KES systems enable tool-less configuration of cable and conduit feedthroughs and entries, as well as subsequent changes without compromising the ingress protection degree.

Datum: 19.02.2020

Zeichen: 869

The mushroom head of the KDS/KES-VS sealing plugs prevents their being inserted too deep and lets them easily be removed

Download

Blind plates for sealing enclosure openings

CONTA-CLIP adds new KDS-BP blind plates to the range of accessories for its proven KES cable entry and KDS cable feedthrough systems. The black screw-on blind plates are designed for quickly and reliably closing pre-configured enclosure openings with standard dimensions of 86 mm x 36 mm and 112 mm x 36 mm. The plates made of impact-resistant PA 6.6 feature an all-round injected TPE gasket. They protect the inside of machines or control cabinets from dust and strong jet water according to IP66.

Datum: 29.01.2020

Zeichen: 498

KDS-BP blind plates enable provisional sealing of enclosure openings

Download

Modular cable entry for cables with plugs

CONTA-CLIP expands its cable entry portfolio, launching the KDS-R system for M20 to M63 round openings suited to cables with and without plugs. This new cable management system consists of a handful of basic components: the actual cable entry frame with an integrated gasket, a two-piece thread and locking adapter plus two-piece locknut to fix it in place, and sealing elements with a range of inlays. Assembly is tool-less, quick, and easy. Cables with and without plugs are simply fed through the enclosure opening and cable entry frame. Slit, tapered, finned sealing elements are fitted around individual cables on the inside. Cables with sealing elements are then pushed back to fit tight in the cable entry frame. I-, T-, and +-shaped inlays are available for M40 and larger openings, allowing for insertion of a variety of cable sealing elements as required. The cable entry frame as a whole is fixed in place by attaching a two-part thread and locking adapter to the frame on the outside of the enclosure and attaching a separable locknut on the inside. The special shape of the sealing elements ensures high IP66 ingress protection and strain relief working towards accordance with DIN EN 62444. The wide range of sealing elements for various diameters, shapes, and multiple holes offers high flexibility in creating wiring solutions. The tool-less system ensures that retrofitting work requires very little effort. Unused entry positions in the frame can be sealed with blanking plugs, which can be easily removed at any time to allow additional cables to be inserted.

Datum: 31.07.2019

Zeichen: 1578

The tool-less system offers versatile options for IP66 cable entry

Download

Direct Modbus connection to PLCs

GSM-PRO2 series communication modules from CONTA-CLIP feature a Modbus RTU (RS485) interface that enables easy data exchange with other controllers. The modules operate in slave mode and can, for example, provide a PLC with added GSM functionality via an easy plug connection to the RS485 port directly on the C-type mounting rail. The GSM-PRO-CON extension module from CONTA-CLIP makes wiring even simpler. Plugged into the GSM-PRO2 module, it offers front-access terminals for connection to the controller. The GSM-PRO2 parameterization software can be programmed to send a text or email fault message to specified recipients when the status of the PLC input changes. Prompted by a text message that is sent to the GSM-PRO2 module, data is written into the PLC's digital and analog registers via the Modbus RTU interface. The PLC, acting as a master, reads out the data in order to trigger the corresponding actions. Various communication modules with and without GPS functionality are available for all common wireless standards up to 4G. Apps for iPhone and Android devices enable flexible monitoring and control and provide an instant overview over the statuses of several modules at once. Users do not need any programming skills to parameterize the modules. Firmware updates and online configuration changes can be easily carried out at any time via the GSM network, even after installing and commissioning the modules.

Datum: 18.07.2019

Zeichen: 1426

The compact communication module features a Modbus RTU interface for easy data exchange with the PLC

Download

IP66 cable entries for all shapes and sizes

Connection technology expert CONTA-CLIP supplies versatile components for simple and time-saving cable management. The tool-less KDS and KES cable entry systems enable easy routing and flexible rearrangement of cables and conduits in enclosures and control cabinets, with reliable strain relief and IP66 ingress protection. To install any number of differently sized and shaped cables, enclosures no longer need to be fitted with variously sized openings, reducing the machining effort to a minimum. This enables manufacturers to supply fully sealed, preconfigured machine enclosures and control cabinets without knowing the exact final wiring requirements. One-piece KES plates with push-through membranes enable high-density routing of up to 32 unassembled cables, wires, or conduits. The multi-part KDS system features a frame that can always stay in place once it is installed – removable sealing elements in different sizes can be inserted to change the assembly as needed. As a result, stock-keeping costs are also significantly reduced, since there is no need for various same-size enclosures with a range of different prepared openings. The KDSClick system consists of only three basic components: frames, inlays, and sealing elements. The sealing elements are available in over 100 variants for diameters ranging from 2 mm to 35 mm, with 1, 2, and 4 slots, for industrial flat ribbon cables, and as blind plugs. The frames are available for 4, 6, 8, or 10 sealing elements. Featuring an injected foam gasket, they preserve the IP66 protection rating even on painted or rough surfaces. To accommodate the selected sealing elements, various inlays (available in I, T, +, and ++ shapes) can be simply inserted in the frame. KDS-FP flange plates hold two or three KDSClick modules and provide space for a total of up to 30 sealing element positions, making them ideal for control cabinets that require a lot of wiring. CONTA-CLIP furthermore offers the KDS-R series for quick, tool-less assembly in metric M20 to M63 round enclosure openings. This system consists of a frame with an integrated gasket, a thread and locking adapter, a locknut, and sealing elements with optional inlays. The KDS program also includes KDS-FB frames for industrial flat ribbon cables. These are available in four frame widths and different partitions for flat as well as round cables.

Datum: 19.06.2019

Zeichen: 2368

The KDS and KES product families enable easy, variable cable management for all diameters and shapes

Download

4G-enabled I/O communication modules

Introducing GSM-PRO2 and GSM-PRO2E communication modules, CONTA-CLIP presents economic 4G wireless remote control and maintenance solutions for decentralized applications. If no 4G network is available, the modules automatically fall back on 3G or 2G networks. Users can enhance the GSM-PRO2 module by adding inputs and outputs using I/O extension modules. The basic GSM-PRO2E device features four relay outputs and 10 inputs. I/Os can be configured for digital (24V DC) or analog (0...10V and 0[4]...20mA) signals, as required. The manufacturer supplies suitable models for the European as well as the US market. GSM-PRO modules automatically alert users via text or email messages when the monitored process reaches a defined state or preset limits are exceeded. Control-room staff or service technicians can switch the digital relay outputs of the GSM-PRO2 via text messages. The devices' log functions enable tracking of communications, process values of the analog inputs, and I/O activation events over freely programmable periods of time. Log files can be read out via a USB interface or sent to an email address. Apps for iPhone and Android devices enable fast and easy monitoring and control of the communication modules and allow for a quick overview of all I/O statuses for several modules at once. Parameterization requires no programming skills. Firmware updates and configuration changes can be easily carried out at any time via the GSM network, even after installation and commissioning of the modules.

Datum: 12.06.2019

Zeichen: 1518

The configurable communication modules enable remote control and maintenance via 4G wireless networks

Download

Pers relatie

De directe route naar onze marketingafdeling….

Schrijf een e-mail aan onze marketingafdeling met uw verzoek en wij beantwoorden uw email zo spoedig mogelijk.

E-Mail

Wij gebruiken cookies om onze website voortdurend te optimaliseren. Door de website te blijven gebruiken, gaat u akkoord met het gebruik van cookies. Meer informatie over het gebruik van cookies op onze website is te vinden in ons privacybeleid.

 

Contact

CONTA-CLIP Nederland B.V.

Savelveld 1
6039 SB Stramproy

Tel:  +31 (0)495 566 046

Contactformulier